Wrought Iron Fence Types for Hesperia Homes
Tubular Steel Picket Fences
This is what most quotes mean by "wrought iron": square steel tubing welded into panels, with straight pickets and at least two horizontal rails, then coated black. A galvanized version adds a zinc layer under the paint, which costs a bit more and protects against rust.
- Plain black: $50 to $60 a linear foot installed
- Galvanized: $60 to $65 a linear foot installed
- Labor share: about $15 to $25 a linear foot
Solid Wrought Iron (Forged) Fences
True wrought iron is about 99% iron, heated and shaped by hand, and only a blacksmith makes it. Hand work makes it slower to order, and it resists rust better than mass-produced mild steel. Twisted pickets and scrolls can be done in steel too, so ask which one you're being quoted.
- Ornamental designs: $65 to $85 a linear foot installed
- Custom-designed ornamental: $85 to $130 a linear foot
Iron Panels on Block Walls
Iron on top of a low block wall or between block columns gives a solid base with an open view above it. The block base and columns are masonry work under a different license, covered on the block wall installation page. The iron installer then fits the panels to the columns.
- Iron panels: about $50 to $85 a linear foot installed
- A brick column or pillar: $500 to $1,800 each
Privacy Panel or Slat Inserts for Iron
An iron fence gives no privacy on its own. Bamboo screens, decorative slats or a hedge behind it are the usual fixes. Screening also turns the fence into a solid surface for wind, so ask whether the posts need upsizing first.
- Slatted ornamental frame (aluminum, for comparison): $75 to $110 a linear foot installed
Walk Gates in Iron
A walk gate is built to match the fence and hangs on posts set in concrete. Driveway and RV gates are a separate job with their own hardware (driveway gates). A gate in a pool barrier has its own latch and closing rules, listed on the pool fence page.
- Iron gate: $200 to $650 for materials alone
Why Hesperia homeowners call Hesperia Expert Fencing
- Calling or using the form doesn't cost you anything
- We send your job to one contractor, so your phone isn't ringing all week
- Ask for posts, footings, gates and haul-away priced line by line
- Look up the C-13 (fence) or C-29 (block wall) license at cslb.ca.gov
Iron Fence Prices by Height and Finish
HomeGuide's national figures for installed iron fencing, by height:
| Height | Per linear foot installed |
|---|---|
| 3 ft | $40-$50 |
| 4 ft | $50-$65 |
| 5 ft | $65-$75 |
| 6 ft | $75-$85 |
Materials make up about $35 to $60 of each foot and labor $15 to $25. What moves a quote:
Bars and pickets
the cheapest panels have two horizontal rails; heavier ones have four or more, and closer pickets use more steelPosts
heavy iron needs posts set in concreteSlope and rock
both add labor for metal fencesColumns and gates
each one is priced separatelyOld fence
tear-out is its own line (fence removal)
Worked example (our arithmetic): 120 feet of 5-foot fence at $65 to $75 a foot is $7,800 to $9,000, before a walk gate.
Installation Steps and Upkeep
National guides put most fence installs at 2 to 4 days, with 1 to 4 days for post concrete to cure.
- 1
Measure and check the yard rules
(below), especially for anything in the front setback. - 2
Mark utilities
before post holes go in (811 and DigAlert). - 3
Set posts
in concrete and let them cure. - 4
Hang panels and gates
, then check the gate swing and latch. - 5
Touch up
every cut or weld so bare steel isn't left exposed.
Upkeep is paint. Guides suggest cleaning, removing rust and repainting about once a year; hiring it out runs $5 to $12 a linear foot.
Hesperia Fence and Wall Height Rules
Our reading of Development Code section 16.20.072 (Title 16 of the Hesperia Municipal Code). We read it through a third-party copy because the official code site blocked us, so confirm your lot with the city before you build.
Front setback, solid
walls, fences and hedges that block the view are limited to 36 inches above grade.Front yard, open wire
up to 4 feet on lots under 15,000 square feet; up to 6 feet without slats on lots of 15,000 square feet or more.Front yard, ornamental
estate-type see-through fences of ornamental metal with masonry pillars may reach 6 feet above grade, with solid parts at 36 inches.Chain link with slats
not treated as ornamental, so it's held to 36 inches in front unless the lot is at least 15,000 square feet.Rear and interior side yards
6 feet in the agricultural and residential zones; street side yards are also 6 feet.Approval
fences and walls in the front setback need an approved plot plan and must stay out of any required clear sight triangle.Materials
the code lists masonry block, split-face block, wrought iron, chain link, slats, vinyl and split rail.