Driveway Gate Types for Hesperia Homes
Double Swing Driveway Gates
Two leaves meet in the middle, so each half is shorter than one wide leaf would be. Gates are usually hung to swing inward so they stay off the property line. Where the drive slopes up past the gate, an outward swing can avoid the leaves hitting the slope.
- Manual double swing gate: $1,000 to $4,000 before installation
- Manual single swing gate: $500 to $3,000 before installation
Sliding (Rolling) Gates
A slide gate rolls sideways along a track, so it needs no swing room and works on a steep drive. Cost guides also rate it harder to force open than a swing gate. What it does need is a straight run of fence beside the opening to roll along.
- Manual single slide gate: $500 to $1,200 before installation
- Manual double slide gate: $1,600 to $3,000 before installation
RV and Boat Gates
An RV, boat or trailer usually needs the widest residential size, 18 feet. A leaf that long is heavy and catches a lot of wind, so ask about the post size and footing as well as the gate. Most RV gates are sold automated.
- 18-foot gate, gate only: $2,500 to $6,000
- RV gates, mostly automatic: $1,000 to $9,000
Steel Gates with Privacy Panels
A welded steel frame filled with slats or sheet hides the yard and stays rigid. Steel needs little upkeep, though cost guides note it offers fewer design options than iron. A solid infill catches more wind than open pickets, so ask how the frame is braced.
- Steel gate, gate only: $900 to $6,300
- Manual steel gate: $600 to $4,000
Wood or Vinyl Driveway Gates
Wood gives the most privacy of any gate material but needs regular staining or painting, and it can crack and warp. Vinyl is the budget option, though cost guides warn it can soften and warp in hot weather. Aluminum is the lighter alternative and is less prone to sagging.
- Manual wood gate: $300 to $4,000
- Manual vinyl gate: $200 to $1,100
- Manual aluminum gate: $1,800 to $4,100
Opener-Ready Posts and Gate Frames
If you may add an opener later, say so before the posts go in. An existing gate can be automated only if it opens freely without dragging, and the industry standard for automated gates calls for removing the manual latch first and may require upgrades to an older gate. Opener types and prices are on the automatic gate opener page.
Why Hesperia homeowners call Hesperia Expert Fencing
- Calling or using the form doesn't cost you anything
- We send your job to one contractor, so your phone isn't ringing all week
- Ask for posts, footings, gates and haul-away priced line by line
- Look up the C-13 (fence) or C-29 (block wall) license at cslb.ca.gov
Driveway Gate Prices by Width and Material
National guides price the gate and the installation separately. Of a $4,000 average job, about $750 to $2,500 is labor. Gate-only prices for a manual gate by width:
| Gate width | Manual gate, before installation |
|---|---|
| 10 ft | $200 to $2,000 |
| 12 ft | $300 to $3,400 |
| 14 ft | $500 to $3,600 |
| 16 ft | $700 to $4,000 |
What moves the price: the width, an 8-foot height instead of 6, the material, single or double leaves, and whether an opener goes on now. Replacing an existing gate runs $2,000 to $10,000 in one national guide, depending on the work of taking the old one out. California also caps the deposit on a home improvement job (see block walls).
How a Driveway Gate Goes In
- 1
Measure the opening and the swing or slide path
Note the slope, the clear ground and any fence the gate will roll along. - 2
Dig and set the gate posts
Post concrete can need 1 to 4 days to cure before a heavy leaf hangs on it. - 3
Hang the gate and fit the hardware
Hinges, track, rollers, stops and latch go on. - 4
Adjust and test
The leaves should meet level and latch without lifting.
Gate Planning for Hesperia Wind and Lot Lines
Wind matters more for a gate than for a fence. The industry rationale for automated gates notes that wind can push a moving slide gate out of plumb as it travels. The city's design wind figures are on the wind-damaged fence repair page. Height limits inside the front setback and the clear sight triangle at a driveway are summarized on the wrought iron fence page. Check both before you pick a gate height.